SMC Networks 8014WN2 Manual De Usuario
錯誤! 尚未定義樣式。
13
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
SMC8014WN2 Front and Rear panels
The front panel of the SMC8014WN2 Wireless Cable Modem Gateway contains a set of
light-emitting diode (LED) indicators that show the status of the Gateway and simplify
troubleshooting. Figure 3 shows the front panel LEDs and Table 3 describes the them.
light-emitting diode (LED) indicators that show the status of the Gateway and simplify
troubleshooting. Figure 3 shows the front panel LEDs and Table 3 describes the them.
Figure 3. Front Panel of the SMC8014WN2 Wireless Cable Modem Gateway
Table 3. SMC8014WN2 Front Panel LEDs
Icon
Icon Name
Description
Power
Green = power is supplied to the Gateway.
OFF = power is not supplied to the Gateway.
OFF = power is not supplied to the Gateway.
DS
Green Flashing =-attempt to connect to downstream frequency.
Green On = Gateway is connected to downstream frequency.
OFF = not scanning.
Green On = Gateway is connected to downstream frequency.
OFF = not scanning.
US
Green Flashing= attempt to connect upstream frequency
Green ON = Gateway is connected to upstream frequency.
OFF = not scanning.
Green ON = Gateway is connected to upstream frequency.
OFF = not scanning.
Status
Green ON = cable modem has finished CMTS registration.
Green Flashing = cable modem is attempting to register with CMTS.
Green Flashing = cable modem is attempting to register with CMTS.
LAN
Green ON = connected at 10 Mbps or 100 Mbps
Green Flashing = data is transmitting.
OFF = no Ethernet link is detected.
Green Flashing = data is transmitting.
OFF = no Ethernet link is detected.
WLAN/WPS
Wireless Function
Green ON = wireless interface is enabled.
Green Flashing= data is transmitting.
OFF = wireless interface is disabled.
WPS Function
Green and Red dual colors LED generate WPS LED behavior . Disable WLAN control ability
Green ON = wireless interface is enabled.
Green Flashing= data is transmitting.
OFF = wireless interface is disabled.
WPS Function
Green and Red dual colors LED generate WPS LED behavior . Disable WLAN control ability
to avoid WPS LED behavior if LED works as WPS function.