SMC Networks D3USG Manual De Usuario
American National Standard
Methods of Measurement of the
Electromagnetic and Operational
Compatibility of Unlicensed Personal
Communications Services (UPCS)
Devices
Methods of Measurement of the
Electromagnetic and Operational
Compatibility of Unlicensed Personal
Communications Services (UPCS)
Devices
1.
1.1
1.2
Overview
Scope
This standard sets forth uniform methods of measurement of the electromagnetic and operational
compatibility of unlicensed personal communications services (UPCS) devices. This standard does not
cover licensed personal communications services (PCS) devices. The recommended methods are applicable
to the radio transmitter and monitoring devices contained in the UPCS device. These methods apply to the
measurement of individual UPCS devices. Additional methods may be added to this standard to fulfill
future requirements.
In addition to the measurements specified herein, UPCS devices may also be required to be tested in
accordance with other standards. Examples are listed in Annex A.
compatibility of unlicensed personal communications services (UPCS) devices. This standard does not
cover licensed personal communications services (PCS) devices. The recommended methods are applicable
to the radio transmitter and monitoring devices contained in the UPCS device. These methods apply to the
measurement of individual UPCS devices. Additional methods may be added to this standard to fulfill
future requirements.
In addition to the measurements specified herein, UPCS devices may also be required to be tested in
accordance with other standards. Examples are listed in Annex A.
Applications
The procedures given herein may be used to test UPCS devices permitted under 47CFR15, Subpart D.
emissions and operational characteristics of UPCS devices are the basic parameters affecting UPCS
coexistence with other electronic devices and systems. In particular, compliance with this standard may be
used to demonstrate electromagnetic compatibility with other UPCS systems and other systems operating in
the same and adjacent frequency bands.
coexistence with other electronic devices and systems. In particular, compliance with this standard may be
used to demonstrate electromagnetic compatibility with other UPCS systems and other systems operating in
the same and adjacent frequency bands.
1
For information on references, see Clause 2.
1
Copyright © 2007 IEEE. All rights reserved.
Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited.