SMC Networks D3USG Manual De Usuario
Introduction
This introduction is not part of ANSI C63.17-2006, American National Standard Methods of Measurement of the
Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS)
Devices.
Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS)
Devices.
In November 1993, the Federal Communications Commission (FCC) invited ANSI C63 “to consider
development of standard measurement procedures to support” proposed new provisions to Part 15 of
Volume 47 of the Code of Federal Regulations (47CFR15)
development of standard measurement procedures to support” proposed new provisions to Part 15 of
Volume 47 of the Code of Federal Regulations (47CFR15)
for unlicensed personal communications
services (UPCS) devices. At its December 1993 meeting, ANSI C63 established a subcommittee (SC 7) to
attempt to develop such standards in cooperation with representatives of the Wireless Information
Networks Forum (WINForum) and other interested parties. The standard ANSI C63.17-1998 was the result
of the efforts of SC 7.
In the fall of 2004, the FCC revised provisions of 47CFR15 governing the 1920 MHz to 1930 MHz UPCS
band. A working group was formed under the aegis of SC 7 to rewrite ANSI C63.17-1998 to reflect the
changes in 47CFR15. This revised standard is, again, the result of the efforts of SC 7.
attempt to develop such standards in cooperation with representatives of the Wireless Information
Networks Forum (WINForum) and other interested parties. The standard ANSI C63.17-1998 was the result
of the efforts of SC 7.
In the fall of 2004, the FCC revised provisions of 47CFR15 governing the 1920 MHz to 1930 MHz UPCS
band. A working group was formed under the aegis of SC 7 to rewrite ANSI C63.17-1998 to reflect the
changes in 47CFR15. This revised standard is, again, the result of the efforts of SC 7.
Notice to users
Errata
Errata, if any, for this and all other standards can be accessed at the following URL: http://
standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for
errata periodically.
standards.ieee.org/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for
errata periodically.
Interpretations
Current interpretations can be accessed at the following URL: http://standards.ieee.org/reading/ieee/interp/
index.html.Notice to users
index.html.Notice to users
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence
or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying
patents or patent applications for which a license may be required to implement an IEEE standard or for
conducting inquiries into the legal validity or scope of those patents that are brought to its attention.
covered by patent rights. By publication of this standard, no position is taken with respect to the existence
or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying
patents or patent applications for which a license may be required to implement an IEEE standard or for
conducting inquiries into the legal validity or scope of those patents that are brought to its attention.
________________________
a
For information on references, see Clause 2.
iv
Copyright © 2007 IEEE. All rights reserved.
Licensed to Sid Sanders. ANSI order X_30788. Downloaded 11/19/2007 2:45 PM. Single user license only. Copying and networking prohibited.