HID Global Corporation OK5422 Manual De Usuario
eBase Models
1021, 3021, 3121, 5021,
5022, 5023, 5025, 5027,
5127, 5421, 5422, 5427, 6121
Drivers and Manuals:
www.hidglobal.com/omnikey
© 2010-2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document
may not be reproduced, disseminated or republished in any form without the prior written
permission of HID Global Corporation. HID Global, HID, the HID logo, iCLASS SE, OMNIKEY,
and Seos are the trademarks or registered trademarks of HID Global Corporation, or its
licensors, in the U.S. and other countries.
Introduction
This guide describes physical behaviour and conformities of
the OMNIKEY Smart Card Readers.
the OMNIKEY Smart Card Readers.
1021 USB - Desktop smart card reader in a small form factor
for desktop and mobile usage.
3021 USB - High-performance smart card reader, with a
USB interface and small form factor for desktop and mobile
usage.
usage.
3121 USB - High-performance smart card reader for desktop
use with multiple standing base options in a robust housing.
5021 USB - Contactless Reader with USB interface for
desktop use that reads/writes to 13.56 MHz smart cards.
5022 USB - Contactless Reader with USB CCID-compliant
interface for desktop use that reads/writes to 13.56 MHz
smart cards.
5023 USB - A 5022 Reader with iCLASS and Seos support.
5027 USB - A 5023 Reader with Keyboard wedge.
5025 CL USB - Contactless Reader with USB CCID-
compliant interface for desktop use that reads contactless
(125 kHz) Prox cards.
(125 kHz) Prox cards.
5127 / 5427 CK/ 5427 UE USB - Contactless
13.56MHz/125kHz reader with CCID/Keyboard wedge
interface.
interface.
5421 / 5422 USB - Dual interface PC-linked reader that
reads/writes to 13.56 MHz contactless cards and virtually
any contact smart card. 5422 includes CCID.
any contact smart card. 5422 includes CCID.
6121 Mobile USB - Dongle-sized smart card reader for SIM-
sized smart cards, especially well suited for use with mobile
devices.
devices.
Parts
• Smart Card Reader
• Installation Guide
Find drivers, reader documentation supporting various
operating systems at:
www.hidglobal.com/omnikey
See the application note for card loading and handling
instructions at:
www.hidglobal.com/omnikey
Specifications and Installation
For further information, contact HID support:
www.hidglobal.com/support.
For driver setup, consult the OMNIKEY Smart Card User Guide.
CAUTION: Install the drivers prior to attaching the
OMNIKEY reader with the computer.
ATTENTON: Vous devez installer le driver avant de
connecter le lecteur OMNIKEY à l’ordinateur.
USB Connected Reader Specifications
USB Connected Reader Installation
1. Connect the reader with computer; plug the USB
connector into your computer’s USB port.
2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the
reader logo. For contact smart cards, insert the card into
the reader with contacts facing up.
the reader with contacts facing up.
4. When the reader is exchanging data with a card (reading/
writing), the LED blinks.
Operating Temperature
32° to 131° F / 0° to 55° C
PC Connector Cable
59.1 in/150 cm – Models 1021, 3021, 3121,
5022, 5023, 5027, 5422
78.7 in/200 cm – Models 5021, 5025 CL,
5421, 5427 CK
70.9 in/180 cm – Other Models
Mean Time Between
Failures (MTBF)
Failures (MTBF)
500,000 Hours
Host Interface
USB 2.0 CCID (USB 1.1 Compatible)
Host Data
Transmission Speed
Transmission Speed
12 Mbps (USB 2.0 Full Speed)
Power Supply
Bus Powered
Installation Guide
Americas andCorporate
611 Center Ridge Drive
Austin, TX 78753
USA
Asia Pacific
19/F 625 King’s Road
North Point, Island East
Hong Kong
Europe, Middle East and Africa
Phoenix Road
Haverhill, Suffolk CB9 7AE
England
www.hidglobal.com/support