HID Global Corporation OK5422 Manuale Utente

 

1021, 3021, 3121, 5021,

 

5022, 5023, 5025, 5027,

 

5127, 5421, 5422, 5427,  6121

 

 

© 2010-2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document 

may not be reproduced, disseminated or republished in any form without the prior written 

permission of HID Global Corporation. HID Global, HID, the HID logo, iCLASS SE, OMNIKEY, 

and Seos are the trademarks or registered trademarks of HID Global Corporation, or its 

licensors, in the U.S. and other countries.

 

 

This guide describes physical behaviour and conformities of 
the OMNIKEY Smart Card Readers.

 

1021 USB - Desktop smart card reader in a small form factor 

for desktop and mobile usage.

 

3021 USB - High-performance smart card reader, with  a 

USB interface and small form factor for desktop and mobile 
usage.

 

3121 USB - High-performance smart card reader for desktop 

use with multiple standing base options in a robust housing.

 

5021 USB - Contactless Reader with USB interface for 

desktop use that reads/writes to 13.56 MHz smart cards.

 

5022 USB - Contactless Reader with USB CCID-compliant 

interface for desktop use that reads/writes to 13.56 MHz 

smart cards.

 

5023 USB - A 5022 Reader with iCLASS and Seos support.

 

5027 USB - A 5023 Reader with Keyboard wedge.

 

5025 CL USB - Contactless Reader with USB CCID- 

compliant interface for desktop use that reads contactless 
(125 kHz) Prox cards.

 

5127 / 5427 CK/ 5427 UE USB - Contactless 

13.56MHz/125kHz reader with CCID/Keyboard wedge 
interface.

 

5421 / 5422 USB - Dual interface PC-linked reader that 

reads/writes to 13.56 MHz contactless cards and virtually 
any contact smart card. 5422 includes CCID.

 

6121 Mobile USB - Dongle-sized smart card reader for SIM- 

sized smart cards, especially well suited for use with mobile 
devices.

 

 

• Smart Card Reader

 

• Installation Guide

 

Find drivers, reader documentation supporting various 

operating systems at:

 

www.hidglobal.com/omnikey

 

See the application note for card loading and handling 

instructions  at:  

www.hidglobal.com/omnikey

 

 

For further information, contact HID support: 

www.hidglobal.com/support.

 

For driver setup, consult the OMNIKEY Smart Card User Guide.

 

CAUTION: Install the drivers prior to attaching the 

OMNIKEY reader with the computer.

 

ATTENTON:  Vous devez installer le driver avant de 

connecter le lecteur OMNIKEY à l’ordinateur.

 

 

 

 

1.  Connect the reader with computer; plug the USB 

connector into your computer’s USB port.

 

2.  When the reader is operational, the LED illuminates.

 

3.  For contactless operation, hold the card next to the 

reader logo. For contact smart cards, insert the card into 
the reader with contacts facing up.

 

4.  When the reader is exchanging data with a card (reading/ 

writing),  the  LED blinks.

 

 

32° to 131° F / 0° to 55° C

 

 

59.1 in/150 cm – Models 1021, 3021, 3121,

 

5022, 5023, 5027, 5422

 

78.7 in/200 cm – Models 5021, 5025  CL,

 

5421, 5427 CK

 

70.9 in/180 cm – Other   Models

 

 

500,000 Hours

 

 

USB 2.0 CCID (USB 1.1 Compatible)

 

 

12 Mbps (USB 2.0 Full  Speed)

 

 

Bus Powered

 

 

 

Installation Guide

 

 

611 Center Ridge Drive 

Austin,  TX  78753

 

USA

 

19/F 625 King’s Road 

North Point, Island  East 

Hong Kong

 

 

Phoenix Road

 

Haverhill, Suffolk CB9 7AE 

England