Casi Rusco 1000-1010 Manual De Usuario
Model 1000/1010 Dual Tech (Prox/MagStripe) Reader
31
7. Verify proper reader operation as follows:
A. Select a known good test badge. Be sure that the badge is
properly enrolled in the host system. If the reader is used with a
keypad, assign a proper PIN.
B. Ensure that the door is secure. This is the first step to verify that
the reader strike relay is wired properly.
C. Pass the card through the reader. Observe that the yellow LED
lights and the reader beeps briefly.
D. If used with a keypad, enter the PIN number when the yellow
LED lights. Refer to the appropriate host manual for the correct
PIN entry sequence.
E. Observe that the green LED turns on and remains on, indicating
a valid access has been granted by the host.
F. Open the door. This verifies that the reader strike relay operates
properly.