Casi Rusco 1000-1010 Manual De Usuario
32
Model 1000/1010 Dual Tech (Prox/MagStripe) Reader
Troubleshooting the Reader
If the operation of a component is in doubt, substitute a known good
component and retry the system.
Always verify wiring against the wiring diagrams before powering up
Always verify wiring against the wiring diagrams before powering up
the system.
Refer to the following Troubleshooting Chart.
Refer to the following Troubleshooting Chart.
IF YOU SEE THIS:
EXPLANATION/ACTION:
None of the LEDs
are on.
are on.
Swipe a badge through the reader and listen for
the beep while watching the yellow LED.
the beep while watching the yellow LED.
•
If the beeper sounds and the yellow LED lights
briefly, the reader has power. Replace the
reader.
briefly, the reader has power. Replace the
reader.
•
If the beeper does not sound and the yellow
LED is off, check the power connection to the
reader as described in step 4 of the Test
Procedure on page 26.
LED is off, check the power connection to the
reader as described in step 4 of the Test
Procedure on page 26.