Trimble Inc. 10950 Manual De Usuario
100
Alloy GNSS reference receiver User Guide
Upgrading the Receiver Firmware
B
In this appendix:
The WinFlash utility
Upgrading the receiver firmware
Forcing the receiver into Monitor mode
Upgrading the receiver firmware
Forcing the receiver into Monitor mode
The receiver is supplied with the latest version of the
receiver firmware already installed. If a later version
of the firmware becomes available, use the WinFlash
utility to upgrade the firmware on your receiver.
Firmware updates are available to download from
the Trimble website. Go to
receiver firmware already installed. If a later version
of the firmware becomes available, use the WinFlash
utility to upgrade the firmware on your receiver.
Firmware updates are available to download from
the Trimble website. Go to
www.trimble.com/Support
and select the link to the
receiver that you need updates for and then click
Downloads. Running the WinFlash installer installs
the appropriate files to your hard drive.
You can also upgrade the Alloy receiver through the
web interface. The firmware file required to upgrade
the receiver through the Web interface is located in
C:\Program Files\Trimble\WinFlash\Firmware.
The file type required is the format ppp_vxxx.timg
where ppp represents the platform and xxx
represents the version of firmware.
Downloads. Running the WinFlash installer installs
the appropriate files to your hard drive.
You can also upgrade the Alloy receiver through the
web interface. The firmware file required to upgrade
the receiver through the Web interface is located in
C:\Program Files\Trimble\WinFlash\Firmware.
The file type required is the format ppp_vxxx.timg
where ppp represents the platform and xxx
represents the version of firmware.