Benq Corporation WDP02T Manual De Usuario

  21

  Troubleshooting

No video is displayed on the screen.

• Verify that the proper cables have been installed and selected between the transmitter input 

jack and your high-definition equipment jack.

• At your projector side (connected to the receiver), select HDMI as the input source.
• Verify the power indicator and 

 indicators of the receiver and the transmitter. See 

the following or 

 for more 

information.

LED indicator

OSD 

display

Possible solutions

Power indicator: 
blinking blue

(4 levels 
looping)

• Ensure the transmission range between the transmitter and 

the receiver is NOT beyond 30 meters (100 feet) 
transmission distance in line of sight.

• Try to move the transmitter closer to the receiver.

Power indicator: 
solid blue

Source 
indicator: slow 
flashing

• Ensure your video resolution and frame rate is recognized 

and supported.

• Connect the source device to your display to check and 

modify the video format compatibility.

• Check if your video resolution with HDMI input from your 

device is set among 1080p, 1080i, 720p, 576p, or 480p. 
Please refer Chapter 5 for the detail supported Resolution.

Power indicator: 
solid blue

Source 
indicator: fast 
flashing

• Ensure the proper cables are connected between the 

transmitter and your source devices.

• Ensure your source devices connected to the transmitter 

are turned on.

• Ensure the proper cables are connected between the 

receiver and the projector.