Belkin International Inc. F5D7234A Manual De Usuario
4. Web Configuration
33
Note
1. If you have defined a WEP key on the router, you
have to make this key known to the network adapters
on the PCs that are to be logged on your router.
Otherwise it will not be possible to set up a
connection between the PC and your router.
on the PCs that are to be logged on your router.
Otherwise it will not be possible to set up a
connection between the PC and your router.
2. The encryption depth (64 or 128 bits) must be the
same on the router and on the wireless network
adapters of the PCs.
adapters of the PCs.
Figure 4-16 WEP 64bit and 128bit
WPA
Encryption Technique: Include TKIP and AES; both of them are
Only for WPA and WPA-PSK. Please refer to WPA-PSK for more
information.
Only for WPA and WPA-PSK. Please refer to WPA-PSK for more
information.
Radius Server: For 802.1X and WPA only. Enter the IP Address
of the authentication server, commonly the Radius server.
of the authentication server, commonly the Radius server.
Radius Port: Enter the port number of the authentication server.
The default port number is 1812.
The default port number is 1812.
Radius Key: Enter the same key as the Radius server’s.
Re-Key Interval: Specify the timer the WPA key must changes.
The change is done automatically between the server and the
client.
The change is done automatically between the server and the
client.