Belkin International Inc. F5D7234A Manual De Usuario
4. Web Configuration
35
Use as Access Point
When using the router as an Access Point, you must specify an IP
address for the Access Point. To do this, please select Enable item
to enter the IP address and Subnetmask configuration page. Type
in the IP address and Subnetmask that must suit to the same
range as the network that you will connect to.
address for the Access Point. To do this, please select Enable item
to enter the IP address and Subnetmask configuration page. Type
in the IP address and Subnetmask that must suit to the same
range as the network that you will connect to.
Figure 4-18 User as Access Point
Wireless Birdge
Wireless Bridging or wireless Distribution System (WDS) is used to
connect Wireless Routers and Access points together to extend a
network. There are three settings in this page:
connect Wireless Routers and Access points together to extend a
network. There are three settings in this page:
Enable Wireless Bridging checkbox: Enabling the wireless bridge
feature to allow other Access Points to connect to your device.
feature to allow other Access Points to connect to your device.
Enable ONLY specific Access Point to connect checkbox:
Select this item so that you can type the specific Access Point’s
MAC address in the related fields for limiting specific Access Point
connected by you.
Select this item so that you can type the specific Access Point’s
MAC address in the related fields for limiting specific Access Point
connected by you.
Note
This item can be selected only under the Enable
Wireless Bridging checkbox is enabled.
Wireless Bridging checkbox is enabled.