CALAMP WIRELESS NETWORKS INC. BDP3-AMP Manual De Usuario
120 20191-100a
Paragon-III User Manual
12
3.1.2 5W Transmitter module
The Exciter’s front panel controls and indicators are:
• Carrier Switch - momentarily keys the transmitter ON while
• Carrier Switch - momentarily keys the transmitter ON while
pressed (used for test purposes only).
• On LED - is lit when transmitting
• Line Sensitivity – not used.
• Supply LED - is lit when DC power is applied. Fast Flashes
• Line Sensitivity – not used.
• Supply LED - is lit when DC power is applied. Fast Flashes
when linked with PGM800Win. Slow Flashes indicates VCO
(synthesizer) out of lock. Unequal Flashes indicates internal
communication error.
(synthesizer) out of lock. Unequal Flashes indicates internal
communication error.
• Microphone Socket – not used.
F
Figure 9 – 5W Exciter module
3.1.3 70W Power Amplifier
The power amplifier is maintenance free, only LED indications and a front panel adjustment are
provided for the user.
provided for the user.
Refer to
Figure 3
on page 6 above, for the locations of the indicators and the power adjustment.
Table 2 - 70W Power Amplifier indicators
LED
Function
DC / ON
Lights green when power is applied
RF / ON
Lights yellow when input RF power is applied
OVER / TEMP
Lights red when temperature-based shutdown is triggered
Carrier
Switch
On
LED
Supply
LED
Line
Sensitivity
Microphone
Socket
®
Exciter
Car rier
On
Line
Sensitivity
Supply
Microphone