CALAMP WIRELESS NETWORKS INC. BDP3-AMP Manual De Usuario

120 20191-100a

Paragon-III User Manual

3.1.4 BSC module

The BSC's front panel connectors and indicators are:

Green

Normal operation

Amber

Step 2 in uMon boot-up – lights for <1 sec.

PWR LED

Red

Step 1 in uMon boot-up – lights for <1 sec.

Green

Flashes for each data packets received

RX LED

Red

Discard RX packet (factory-use)

Green

Flashes for each data packets transmitted

Amber

Flashes for each data packets transmitted

(check for lost Host connection)

Red

Continuoulsy ON for TXON test (max. 20 secs.)

Flashes ON for CWID key-up event

TX LED

Off

Check if in “AirLink down mode”

Green

Flashes each time PF1 or PF2 is pressed

STATUS

Amber

Flashes each second PF1 is kept pressed

Toggles “AirLink down mode” after 4 seconds

•  2x DE-9 RS-232 ports for setup and user data
•  1X rocker switch ( positions PF 1 and 2) to select various test modes
•  2x Ethernet ports – for setup and user data
•  2x Ethernet LEDs (status & activity)
•  USB port – reserved.

Figure 10 - BSC module

3.1.5 Speaker panel

The speaker panel is fitted with a four-

speaker.
All series of radio assemblies share the same front
panel fitted with an RJ11 connector. This connector
is used to allow programming the radio transmitter
module (only) from the front of the unit via a pro-
gramming lead. This feature is exclusive to the Se-
ries II and Paragon III modules.
If the speaker panel needs to be removed, a mirror
programming port connector is provided on the
backplane.

Figure 11 - Speaker module

Speaker Panel

programming

port

RX2

RX1

OFF

SPEAKER

SELECT SWITCH

PWR

BSC

ETH 2

USB

ETH 1

COM 2

COM 1

STATUS