CALAMP WIRELESS NETWORKS INC. BDP4-EXT8 Manual De Usuario

The Exciter’s front panel controls and indicators are:
•  Carrier test - momentarily keys the transmitter ON while pressed (used for

test purposes only). If the Carrier is pressed for 4 seconds or more the ex-
citer starts the test mode and keeps transmitting until the next press of the
button.

•  LED indicators, according to the table below.

•  one DE-9 RS-232 ports for setup.  

The BSC2's front panel connectors and indicators are:

Green 

Normal operation

Amber 

Step 2 in uMon boot-up – lights for <1 sec.

Red 

Step 1 in uMon boot-up – lights for <1 sec.

Red

flashing

Hardware error, must check the log files to

identify it

Green 

Flashes for each data packets received

Red         

Discard RX packet (factory-use)

Green 

Flashes for each data packets transmitted

Amber

Flashes for each data packets transmitted 

(check for lost Host connection)

Red

Continuoulsy ON for TXON test (max. 20

secs.)

Flashes ON for CWID key-up event

Off 

Check if in “AirLink down mode”

Green 

Flashes each time PF1 or PF2 is pressed

Amber

Flashes each second PF1 is kept pressed 

•  2x DE-9 RS-232 ports for setup and user data

•  1x rocker switch (positions PF 1 and 2) to select various test modes. See paragraph 5.3.2. 
•  2x Ethernet ports – for setup and user data

normal

Fault 1 (TBD)

fault 2 (TBD)

transmit

Test Mode:  

idle

10 MHz
Locked

10 MHz con-
nection broken,
unable to lock

Acquiring 10
MHz Lock

Idle if 10 MHz
was never
connected.

normal,
Synth lock

Synth unlock
Fault 

Programming
mode

LOCK

PWR

TX

Ext. 10MHz

COM

Carrier Test

®