Boston Scientific Corporation CRM70514 Manual De Usuario
26
Q-TECH™ PROGRAMMER: OPERATiOn
2.
When the scanning process is complete, a list of all SQ-RX devices detected (up to 16)
will be displayed on the Device List (Figure 15). The SQ-RX devices that are in Shelf
mode will be displayed as “Not Implanted.” Any SQ-RX devices that were previously
taken out of Shelf mode are displayed either as “Implanted” or with the stored patient
name.
Figure 15: Device List screen (scrollable list)
3.
If the desired SQ-RX device is not listed, select the Scan Again button to re-initiate the
scanning process. Select the Cancel button to return to the Startup screen.
Note: Refer to the Inability to Communicate with the SQ-RX Device section for
further assistance.