Bewator Ltd. 5PQ-SM500 Manual De Usuario
1-1
Chapter 1
Introduction
The SM501 and SM501K Contactless Smartcard Readers are
designed to read the codes contained in “Mifare” smartcards and to
pass these codes to a host system.
designed to read the codes contained in “Mifare” smartcards and to
pass these codes to a host system.
The SM501K has an integrated keypad. As well as reading cards, it
also passes data entered on the keypad to the host system.
also passes data entered on the keypad to the host system.
The Readers consists of a printed circuit assembly and keypad
mounted inside a plastic enclosure. They require a DC power supply.
mounted inside a plastic enclosure. They require a DC power supply.
Data output
Each Reader provides a choice of Wiegand, Mag Stripe or BCLINK
format data output for the card data (and the PIN data on the K
model).
format data output for the card data (and the PIN data on the K
model).
Reading Smartcard data
By setting a jumper, the Reader can be configured to read one of
three areas of data from the Smartcard:
three areas of data from the Smartcard:
•
Read chip serial number from any Mifare card
•
Read Girovend information only from Girovend cards
•
Read Cotag information only from Cotag cards
Setting up the Reader
You configure the Reader using jumpers as desribed in chapter 2.