B+B SmartWorx WLNG1 Manual De Usuario

 
 

 
 

 

Maintain the All-in-One 

 

 
 

 31 

Clean the wrist case and hand mount 

Use a baby wipe or a cotton cloth dampened with deionized water to scrub all areas of the hand 
mount, straps, and wrist case that have come into direct contact with the skin. 

Clean the door 

To clean the opening in the door, do the following: 

 

 Do not touch the metal contacts or the ink nozzles. 

 

Remove the print cartridge from the door. 

Use a dry cotton cloth to remove the ink-soaked fibers from the opening in the door.  

If the ink is too dry to easily remove the fibers, use a cotton swab dampened with deionized 
water to break down the ink buildup. 

Charge the battery 

To charge batteries, follow the instructions that came with your battery charger. 

Remove the hand mount or handle accessory 

Squeeze both of the release buttons on the back of the hand mount. 

Slide the hand mount backward, off of the All-in-One. 

 

Release button 

 

 

 If you are using the handle accessory instead of the hand mount, see the 

instructions that were included with the handle accessory.