Digital Security Controls Ltd. 15SCW9067 Manual De Usuario
LEGAL
LEGAL (Cont.)
Disclaimer of Warranties
This warranty contains the entire warranty and shall be in lieu of any and all other warranties, whether expressed or implied (including all implied warranties of merchantability or fitness
for a particular purpose) And of all other obligations or liabilities on the part of Digital Security Controls. Digital Security Controls neither assumes responsibility for, nor authorizes any
other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product. This disclaimer of warranties
and limited warranty are governed by the laws of the province of Ontario, Canada.
WARNING: Digital Security Controls recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected.
for a particular purpose) And of all other obligations or liabilities on the part of Digital Security Controls. Digital Security Controls neither assumes responsibility for, nor authorizes any
other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product. This disclaimer of warranties
and limited warranty are governed by the laws of the province of Ontario, Canada.
WARNING: Digital Security Controls recommends that the entire system be completely tested on a regular basis. However, despite frequent testing, and due to, but not limited to,
criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected.
Installer’s Lockout
Any products returned to DSC which have the Installer’s Lockout option enabled and exhibit no other problems will be subject to a service charge.
Out of Warranty Repairs
Digital Security Controls will at its option repair or replace out-of-warranty products which are returned to its factory according to the following conditions. Anyone returning goods to
Digital Security Controls must first obtain an authorization number. Digital Security Controls will not accept any shipment whatsoever for which prior authorization has not been obtained.
Products which Digital Security Controls determines to be repairable will be repaired and returned. A set fee which Digital Security Controls has predetermined and which may be revised
from time to time, will be charged for each unit repaired.
Products which Digital Security Controls determines not to be repairable will be replaced by the nearest equivalent product available at that time. The current market price of the
replacement product will be charged for each replacement unit.
Digital Security Controls must first obtain an authorization number. Digital Security Controls will not accept any shipment whatsoever for which prior authorization has not been obtained.
Products which Digital Security Controls determines to be repairable will be repaired and returned. A set fee which Digital Security Controls has predetermined and which may be revised
from time to time, will be charged for each unit repaired.
Products which Digital Security Controls determines not to be repairable will be replaced by the nearest equivalent product available at that time. The current market price of the
replacement product will be charged for each replacement unit.
D. Intended use
Use the Product for its intended use only; refer to the data sheet and user documentation. Any use other than the Product’s intended use will void any applicable
Use the Product for its intended use only; refer to the data sheet and user documentation. Any use other than the Product’s intended use will void any applicable
warranties. For the latest Product information, contact your local vendor or visit us online at
DSC URL
E. FCC compliance
Changes or modifications not expressly approved by DSC can void the user’s authority to operate the Product. This Product has been tested and found to
comply with FCC Rules.
This Product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this Product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the Product and receiver.
Connect the affected equipment and the Product to separate outlets, on different branch circuits.
Consult the dealer or an experienced radio/TV technician for help.
F. WARNINGS
Warning: Do not connect the Product to an AC receptacle that is controlled by a switch.
Warning: Do not connect the Product to a High Power AC receptacle.
Warning: This Product should be installed in accordance with the National Fire Alarm Code, ANSI/NFPA 72, (National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269). Printed information describing proper installation, operation, testing, maintenance, evacuation planning, and repair service is to be
provided with this Product.
Warning: Owner’s instruction notice: The Product is not to be removed by anyone except occupant or certified dealer representative.
Warning: This Product and all sensors associated with it (collectively, the “System”) should be tested once a week.
Warning: This System must be checked by a qualified technician at least once every three (3) years.
Warning: Users are advised to create their own Fire and Emergency Evacuation plan. Information to create a plan can be found at the following website,
National Fire Protection Association (
) or via other equivalent agencies.
Warning: This System cannot call the local police station directly … all Police Panic Alarms and Intrusion Alarms will be sent to the dealer authorized central
monitoring station who will then handle calling the local police as necessary. The Product cannot be configured to call the local police station.
Warning: This System cannot call the local fire station directly … all Fire Panic Alarms and Fire Detection Alarms will be sent to the dealer authorized central
monitoring station who will then handle calling the local Fire Department as necessary. The Product cannot be configured to call the local Fire Department.
Warning: This System cannot call the local medical emergency personnel directly … all Medical Panic Alarms will be sent to the dealer authorized central
monitoring station who will then handle calling the local medical emergency personnel (often 911 personnel) as necessary. The Product cannot be configured to
call the local medical emergency personnel (nor local 911 services).
Warning: The terminal block that is mounted inside the Product has 8 connectors for wires. There are two additional connectors for the first external sensor
(labeled EXT1 + and EXT1 -), two additional connectors for the second external sensor (labeled EXT2 + and EXT2 -), and finally, two additional connectors for an
external siren (labeled BUZZER + and BUZZER -).
DSC CONFIDENTIAL AND PROPRIETARY PAGE 32 OF 34
© Last updated 2/18/15 All rights reserved
CAUTION! This equipment complies with radiation exposure limits set forth for uncontrolled environment. The antenna(s) used for this transmitters must be installed to provide a
separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.