ADC Telecommunications Inc. PSM1900M Manual De Usuario
RF Cable Connections
FlexWave Prism RF Modules for Prism Remote Units Installation Guide
Page 17
TECP-77-141 Issue 5 • 300001744178 Rev E • November 2013
© 2013 TE Connectivity Ltd.
RF Module Cables for Dual‐Slot Installations
For Dual‐Slot installations, the RF cables and connectors are labeled as
MOD N TX0/RX0
and
MOD N
TX1/RX1
, where
N
refers to the bottom slot of the double‐slot installation. For example, for a
Dual‐Slot installation in a Quad‐Bay chassis, the RF cables and connectors are labeled as
MOD C
TX0/RX0
and
MOD C TX1/RX1
.
The cables and connectors have corresponding labels as shown in
Dual‐Slot 40W RF Modules.
Table 8. RF Antenna Labels for Dual‐Slot 40W RF Modules (Top of Chassis Down)
RF Module
Cable,
RF Module
Connector,
Connector,
and Remote
Antenna
Connector
Labels
Function
Slots for 40W RF Modules
(a) (b)
Dual-Bay
Tri-Bay
Quad-Bay
Mod D
TX0/RX0
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module D
to/from the antenna for RF Module D
N/A
N/A
Slots C and D
Mod D RX1
Diversity receive for RF power from the
antenna for RF Module D
antenna for RF Module D
Mod C
TX0/RX0
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module C
to/from the antenna for RF Module C
N/A
N/A
Mod C RX1
Diversity receive for RF power from the
antenna for RF Module C
antenna for RF Module C
Mod B
TX0/RX0
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module B
to/from the antenna for RF Module B
Slots A and B
Slots A and B
Slots A and B
Mod B RX1
Diversity receive for RF power from the
antenna for RF Module B
antenna for RF Module B
Mod A
TX0/RX0
TX0/RX0
Transmit RF power and primary receive
to/from the antenna for RF Module A
to/from the antenna for RF Module A
Mod A RX1
Diversity receive for RF power from the
antenna for RF Module A
antenna for RF Module A
(a)
N/A indicates that the slot cannot be used for a Dual-Slot 40W RF Module
(b)
Install the Dual-Slot 40W RF Module in the lower-most slot in the chassis. If, however, if two Dual-Slot 40W
RF Modules are present, install the 2100 Module in the lower-most slot and the 1900 Module in the
upper-most slot.
upper-most slot.