ADC Telecommunications Inc. PSM230WM Manual De Usuario

This equipment complies with the applicable sections of Title 47 CFR Part 15 (Host Unit), Part 22 (800 MHz Cellular), Part 
24 (1900 MHz - PCS), Part 90 (800/900 - SMR), and Part 27 (2100 MHz - AWS, 700 MHz -LTE and 2300 MHz - WCS).

WARNING. This is NOT a CONSUMER device. It is designated for installation by FCC LICENSEES and QUALIFIED 
INSTALLERS. You MUST have an FCC LICENSE or express Consent of an FCC Licensee to operate this device. Unauthorized 
use may result in Significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

This equipment complies with the applicable sections of RSS-131- Zone Enhancers for the Land Mobile Service. The term 
“IC:” before the radio certification number only signifies that Industry Canada Technical Specifications were met.

The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple 
carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated 
and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction 
and not by an attenuator at the output of the device.

Note: To comply with Maximum Permissible Exposure (MPE) requirements, the maximum composite output from the 
antenna cannot exceed 1000 Watts ERP (LTE, Cellular and SMR), the antenna cannot exceed 1640 Watts EIRP (PCS and 
AWS), and the antenna must be permanently installed in a fixed location that provides at least 6 meters (20 feet) of 
separation from all persons.

This will be installed in a restricted access location. This equipment complies with Type 4, per UL and CUL 50, Standard for 
Enclosures for Electrical Equipment. This equipment provides the degree of protection specified by IPX6 as defined in IEC 
Publication 529.

This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This product conforms to all applicable standards of 
21 CFR Part 1040.

Caution: Modifications not expressly approved by the party responsible for compliance could void the user's authority to 
operate the equipment.

Meets essential requirements of R&TTE 1999/5/EC. 

Article 3.1a—The protection of the health and the safety of the user and any other person, including the objectives with 
respect to safety requirements contained in Directive 2006/95/EC, but with no voltage limit applying.

Article 3.1b—The protection requirements with respect to electromagnetic compatibility contained in Directive 
2004/108/EC.

Article 3.2—In addition, radio equipment shall be so constructed that it effectively uses the spectrum allocated to 
terrestrial/space radio communication and orbital resources so as to avoid harmful interference.

EN 55022 and EN55024 (CE marked) 

This equipment complies with IEC 60950-1, 2ND Edition + Amendment 1 (CE marked) and with UL 60950-1, 2ND Edition + 
Amendment 1 (File number E174166) (USA and Canada)