ADC Telecommunications Inc. PSM230WM Manual De Usuario

A FlexWave Notch Filter (FWP-SPRINTFILTER) ships with and is required in installations of the following RF 
Modules:

20W 800 SMR/ 1900 PCS, Dual RF Module (FWP-441T841MOD)

20W 800 MIMO, Single Bay, with two External Filters (FWP-44MT000MOD).

You install the Notch Filter between the Prism Remote Unit and the antenna to provide protection from spurious 
emissions in the Public Safety band below 861.35 MHz and the Cellular band above 869.0 MHz. 
The following are installation tips for the Notch Filter:

You can use the same mounting method to mount the Notch Filter as you used to mount the Remote Unit. 

Mount the Notch Filter vertically with the N-type female connectors at the bottom. 

There are two Ground lugs on the Notch Filter, which are on the back of the two mounting brackets. Follow 
local practice to ground the Notch Filter.

 provides the dimensions required to create a mounting template.

16.0 ±.1

.70

.70

2.805

.95

.95

1.00

2 Locaons
5/16-18
Ground Lug

Front View

Side View

Back View

4.55

17.9 ±.1

4.10

Mounng

Bracket

15.93

8.51

Mounng

Bracket

Figure 25. Notch Filter Mounting Dimensions