Microwave Radio Communications LLC PTX127T1CG Manual De Usuario
Installation
6-4
PTX-PRO User and Technical Manual
Figure 6-3: Quick Release Mount on Non-MRC Tripod
Mounting - Non-MRC Tripod (Option 3) A third option is
available to mount a PTX-PRO to a non-MRC tripod that
contains a QuickSet tripod mount. This option requires the use
of a QuickSet Quick Change Adapter. The Quick Change
Adapter is attached to the bottom of the PTX-PRO using four
1/2-inch long, #6-32, pan head screws, lock washers, and flat
washers.
available to mount a PTX-PRO to a non-MRC tripod that
contains a QuickSet tripod mount. This option requires the use
of a QuickSet Quick Change Adapter. The Quick Change
Adapter is attached to the bottom of the PTX-PRO using four
1/2-inch long, #6-32, pan head screws, lock washers, and flat
washers.
The Quick Change Adapter and PTX-PRO assembly is then
attached to the QuickSet tripod mount and is secured with the
tripod mount locking clamp.
attached to the QuickSet tripod mount and is secured with the
tripod mount locking clamp.
.
Flat Head Screws
(4 Each)
(4 Each)
Quick
Release
Mount
Release
Mount
Dovetail Adapter
Plate (Attached to
PTX-PRO)
Plate (Attached to
PTX-PRO)
Tripod
Mount
Mount
Figure 6-4: Quick Change Adapter on QuickSet Tripod
Mount - Typical
Mount - Typical
Final Mounting When the PTX-PRO is mounted on the tripod,
the antenna is typically attached to the Antenna Lock Plate
mounted on the PTX-PRO.
the antenna is typically attached to the Antenna Lock Plate
mounted on the PTX-PRO.
.
Pan Head Screws,
Lock Washers, and
Flat Washers (4 Each)
Lock Washers, and
Flat Washers (4 Each)
Tripod Mount
Locking Clamp
Locking Clamp
QuickSet Quick
Change Adapter
(Attached to PTX-
PRO)
Change Adapter
(Attached to PTX-
PRO)
QuickSet
Tripod
Mount
Tripod
Mount