TransCore IT241005422 Manual De Usuario
Application Program Interface
D-27
mer.
Processor RAM test — This bit indicates a failure of the IT2410 processor RAM
logic module when set to 1. Tests are automatically and continually run internally by
the programmer.
logic module when set to 1. Tests are automatically and continually run internally by
the programmer.
Check tag test — This bit indicates a check tag failure when set to 1.
Valid Response Tag Data
Valid response tag data is reported asynchronously when a tag is detected. The status
codes associated with the tag data reports are shown in Table D-29.
codes associated with the tag data reports are shown in Table D-29.
Table D-29 Tag Data Report Status Codes
When a tag is detected, tag data is sent to the host computer or lane controller. If it
passes the CRC check, the tag data is assumed to not be corrupted.
passes the CRC check, the tag data is assumed to not be corrupted.
Code
Description
3000H
No-tag data status
3001H
IT2200 R/W tag data status
3002H
Reserved