Biolase Inc. EPIC Manual De Usuario

P a g e

                                                                             

5 4 0 0 3 2 1 R e v .   X :   D R A F T

 

 

Failure to comply with precautions and warnings described herein may lead to 
exposure to dangerous optical radiation sources.  Please comply with all safety 
instructions and warnings. 

     

 

Federal Law restricts this device to sale by or under the order of a 
dentist or physician or other licensed practitioner.

 

 

Use of controls or adjustments or performance of procedures other 
than those specified herein my result in hazardous radiation exposure.

 

 

 

Do not use this unit if you suspect it of functioning improperly or 
other than described herein.

 

 

 

This unit has been designed and tested to meet the requirements 
of electromagnetic, electrostatic, and radio frequency interference 
standards.  However, the possibility of electromagnetic or other 
interference may still exist.  Relocating the device may help to 
eliminate the interference.

 

 

 

Always ensure that the proper laser parameters are set before the 
EPIC 10 product is used in a clinical setting.

 

Safety Instructions 
Follow these safety instructions before and during treatments: 

  All operatory entrances must be marked with an appropriate warning sign 

(included with shipment). 

  Do not operate in the presence of explosive or flammable materials. 

Flammable anesthetics or oxidizing gases such as nitrous oxide (N2O) and 
oxygen should be avoided. Solvents of adhesives and flammable solutions 
used for cleaning and disinfecting should be allowed to evaporate before 
laser is used. Attention should also be drawn to the danger of ignition of 
endogenous gases. 

  All persons present in the operatory must wear protective laser eyewear. 

 

 

Periodically inspect laser eyewear for pitting and cracking.

 

 

Always ensure that the protective laser eyewear is appropriate for 
the laser wavelength.

 

  For replacement or additional protective laser eyewear, please contact your  

 

             authorized dealer

 

 

  Do not look directly into the beam or at specular reflections. 
  Never direct or point the beam at anyone's eyes. 
  Always place the system into STANDBY mode (by pressing the control button 

on the control panel while in READY mode) before exchanging handpieces or 
disposable tips.