Technicolor Connected Home USA LLC TCA203 Manual De Usuario
112
Managing Cameras
You can have up to six cameras connected to a TouchScreen at a time. Each camera has a name assigned
to it when it is added. Each camera also can be associated with a sensor so that it takes a series of
pictures when an alarm is tripped by the sensor.
to it when it is added. Each camera also can be associated with a sensor so that it takes a series of
pictures when an alarm is tripped by the sensor.
IMPORTANT:
The camera images are accessible to the TouchScreen device and (for one of the
cameras) to the Subscriber Portal. NOTHING ELSE. Service Provider tools do not have
access to these images.
cameras) to the Subscriber Portal. NOTHING ELSE. Service Provider tools do not have
access to these images.
You can do the following to manage the cameras associated with your security system:
Add a camera (page
)
Modify a camera (page
)
Modifying a camera includes:
Change the label
Assign, reassign, and unassign a camera to a sensor so that it takes a series of pictures
when an alarm is tripped by the sensor
when an alarm is tripped by the sensor
Set the video quality displayed for the camera
Turn the camera LED on and off
Delete a camera (page
)
Replace a camera (page
Note:
If you are reinstalling the same camera, delete it (see page
) and then add it again
(see the following procedure).
Operations to manage the camera are performed from the Installer Settings menu (see
Technician
Operations
on page
80
).
Note:
See
Adding Cameras to the Security System
on page
38
for troubleshooting tips on installing
a camera.
To add a camera to the security device:
Notes:
See
"Adding Cameras to the Security System" on page 38
for information about installing the iCam-
era to the security system and for troubleshooting tips on installing a camera.
Cameras must be connected to the security router during installation. Do not connect a camera to
a Wi-Fi repeater.
a Wi-Fi repeater.
Home System Installation Guide