Technicolor Connected Home USA LLC TCA203 Manual De Usuario
Managing Sensors & Zones
121
Managing Thermostats
A MAXIMUM of six IP cameras and 47 ZigBee devices are supported for
the system. ZigBee devices consist of anything that communicates with
the TouchScreen over radio frequency, such as door/window sensors,
lighting devices, thermostats, panel interface devices, key pads, and key
fobs and smoke detectors.
the system. ZigBee devices consist of anything that communicates with
the TouchScreen over radio frequency, such as door/window sensors,
lighting devices, thermostats, panel interface devices, key pads, and key
fobs and smoke detectors.
A thermostat is a device for managing the environmental temperature of the premises.
Important: The Thermostat must always remain in Simple mode to operate properly.
Perform the operations in this section to manage thermostats:
Add
Delete (page
)
Change the name of a thermostat as shown in reports on the TouchScreen and in the Subscriber
Portal (page
Portal (page
These operations are performed from the Installer Settings menu (see
Technician Operations
on page
80
).
To add a thermostat to the environmental system:
Recommendation: When performing this operation, add the thermostats one at a time.
1. From the Installer Settings menu, tap Home Devices > Thermostats > Add Thermostat.
The Locating Thermostat Devices screen is displayed.
Figure 74: Settings: Locating Thermostat Devices Screen
2. Tap Next. Ensure the thermostats are ready to be paired.
a. Remove the cover at the top of the thermostat device.
A circuit board is displayed with a black button labeled Reset on the leftward side.