Cherry F-89XX Manual De Usuario
3
2 If the CD-ROM does not start automatically,
double-click the CD-ROM drive in Windows
Explorer and then the Start.exe start file.
The page Installation is opened.
Explorer and then the Start.exe start file.
The page Installation is opened.
3 Click on the Cherry product for which you would
like to install the software.
The installation begins.
The installation begins.
4 Follow the installation instructions on the screen.
The Cherry KeyM@n software is installed.
4 Connecting the devices
4.1 Connecting the receiver to the PC via
the USB connection
Windows NT?
Windows NT does not support USB. If the PC has
a USB port, USB Keyboard Support or USB
Legacy Mode must be set to enabled in the BIOS
of the PC. The standard keys will now function, but
the additional keys are not supported.
Windows NT does not support USB. If the PC has
a USB port, USB Keyboard Support or USB
Legacy Mode must be set to enabled in the BIOS
of the PC. The standard keys will now function, but
the additional keys are not supported.
➤
Insert the USB plug of the receiver into any USB
port on your PC. You can also use the USB port
of a device which is connected to the PC.
port on your PC. You can also use the USB port
of a device which is connected to the PC.
4.2 Connecting the receiver to the PC via
the PS/2 port
1 Switch off the PC.
2 Insert the USB receiver plug into the
2 Insert the USB receiver plug into the
accompanying USB-PS/2 adapter.
3 Insert the purple plug of the receiver at the PC
into the 6-pin PS/2 socket for the keyboard,
which may be purple.
which may be purple.
4 Insert the USB-PS/2 adapter of the receiver at
the PC into the 6-pin PS/2 socket for the mouse,
which may be green.
which may be green.
5 Switch on the PC.
4.3 Inserting batteries into the keyboard
and mouse
1 Open the battery compartment on the underside
of the wireless keyboard/mouse.
2 Insert both accompanying rechargeable alkaline
AA (LR6) batteries.
Charge level of alkaline batteries
The alkaline batteries are ready for operation right
away and do not need to be charged before the
initial use. When the
The alkaline batteries are ready for operation right
away and do not need to be charged before the
initial use. When the
LED on the receiver
flashes slowly, the batteries must be charged. LED
green = keyboard batteries, LED red = mouse
batteries.
green = keyboard batteries, LED red = mouse
batteries.
3 Close the battery compartment.
5 Recharging the batteries
Usable battery type
The charging electronics only function with
rechargeable alkaline batteries (example: AccuCell
AC 1800, see technical data). No other batteries
can be charged in the keyboard and mouse. The
batteries of the keyboard are constantly charged
by the solar cells.
Rechargeable alkaline batteries have the following
advantages:
• high capacity (1800 mAh)
• minimal self-discharge
• can be recharged at any time without the
The charging electronics only function with
rechargeable alkaline batteries (example: AccuCell
AC 1800, see technical data). No other batteries
can be charged in the keyboard and mouse. The
batteries of the keyboard are constantly charged
by the solar cells.
Rechargeable alkaline batteries have the following
advantages:
• high capacity (1800 mAh)
• minimal self-discharge
• can be recharged at any time without the
memory effect
• rechargeable several hundred times
• high output voltage (1.5 V)
• environmentally friendly due to less waste
• high output voltage (1.5 V)
• environmentally friendly due to less waste