Badger Meter Inc 2010GW Manual De Usuario
ORION® SE Gateway Transceiver
6. Position the Transceiver on the pole and place another clamp on the bolts.
Figure 3: Transceiver Positioning and Clamp
7. Place another lock washer and nut on each bolt and tighten the bolts.
8. Repeat Steps 1 through 7 for attaching the same hardware to the bottom of the Transceiver.
8. Repeat Steps 1 through 7 for attaching the same hardware to the bottom of the Transceiver.
Figure 4: Completed Transceiver Mounting
Left
Side
Right
Side
Page 8
(1-11)