Badger Meter Inc 2010W Manual De Usuario

When installation of the ORION endpoint occurs in a deep vault, Badger Meter offers a kit that can be used to mount the end-

point to the side of the vault.  To install, mount the ‘C’ clamp on the side of the vault.  Select a location close to the top of the 

vault that will not be damaged when access to the meter is required.  Place the tape, supplied in the installation kit, around 

the endpoint approximately ½” from the top of the endpoint.  Thread the locking ring on the endpoint until it makes contact 

with the tape.  Insert the endpoint into the ‘C’ clamp.  Close the ‘C’ clamp and lock it in place so that it closes over the tape and 

securely holds the endpoint.

NOTE: ORION radio 

                                                                          C-Clamp

      

C-Clamp around Transmitter

Page 8

                   (12-10)