Badger Meter Inc 2010W Manual De Usuario

To install the endpoint through the lid, follow these steps, per Figure 2:

1.  Screw the nut onto the tube threads.
2.  Insert the tube through the bottom of the lid.
3.  Screw the top cap onto the tube threads and tighten.
4.  Tighten the nut against the bottom of the lid until secure.

If installing an ORION endpoint through a thick lid, customer may replace the threaded locking ring (used to secure endpoint 

to underside of the lid) with the plastic washer contained in the kit.  If even more thread is required, Badger Meter also has 

a separate antenna nut 62363-001 that requires a 2” diameter transmitter hole.  This antenna nut provides almost 3/8” of ad-

ditional thread for thick lid applications.

For below the lid installations, a special mounting bracket (Figure 3) is available. This mounting bracket is designed for use 

with 3/8”, 1/2” and 5/8” rebar or 1/2” schedule 40 PVC pipe.  

Pit Lid

Top Cap

Nut

Tube

Page 6

                   (12-10)