Badger Meter Inc 2011M Manual De Usuario

Page 35

12-10

Installation & Operation Manual

A green circle indicates a successful reading with no problems reported.  A green circle that contains the 

letter “L,” indicates a successful reading of an acoustic leak detection module (Permalog®).

A blue diamond indicates an unread meter.  A hollow diamond indicates a meter without an ORION® 

endpoint.    A blue triangle with a hollow “L” indicates an unread acoustic leak detection module.

•

A red circle with a “T” in the center indicates an ORION endpoint tamper condition. 

•

 A red circle with an “E” in the center indicates an encoder connected to the ORION endpoint is 

reporting an error condition.  

•

A red asterisk “*” indicates an ORION endpoint is reporting a potential leak condition (water only).  

•

A red “L” with an asterisk indicates a leak condition by an acoustic leak detection module.  

•

A “C” with a circle around it indicates no usage on that meter since the last report.  

•

An “R” with a circle around it indicates a meter in which flow has reversed.

•

A “?” on the map indicates a meter not in the route.

A missed meter is one that was in range to be read but the reading was not received, and is indicated by a 

red square.  

•

If the square is solid, an ORION endpoint was missed. 

•

If the square is hollow, a non-ORION endpoint was missed.  If the square contains an “L”, the 

reading from an acoustic leak detection module was missed.

Meters read manually are indicated by a pink triangle.

The status bar, located at the bottom of the screen allows you to view the progress of the meter reading and the status of the 

receiver and the GPS systems.  Green lettering in the route summary indicates that the system is operating normally, while red 

indicates the system is not currently in operation.