Badger Meter Inc 2011W Manual De Usuario

When installing an SE or ME (used with a network gateway transceiver) or CE (used with an ORION 4.0 or 2.0 gateway 

receiver) endpoint in a pit, the endpoint must be mounted through the lid of a non-metal pit lid for maximum propagation 

of the radio signal. If the endpoint is being installed indoors, a wired radio endpoint should be mounted on the outside 

of the building or in the floor joist near the outside wall of the building, and away from large metal objects for maximum 

propagation of the radio signal. 

For non-submerged indoor and outdoor applications where splicing is necessary, splice connections together and wrap any 

cables inside the base of the housing. 

Splice connections made in pit environments require a pit field splice kit (62084-001), which can be ordered separately. 

Please refer to RTR-I-15 for field splice kit installation instructions.

ORION endpoints shipped factory pre-wired to a Badger Meter encoder require no splicing. Only the mounting of the 

encoder to the meter and tightening the TORX® seal screw is necessary.  

For all installations, excess wire should be coiled and cable tied to avoid any damage.

PIT

Through the Lid Installation Kit

64394-024

64394-024

64394-001

Below Lid with Knuckles  

Installation Kit 

64394-025

64394-003

Integrated Pit Lid Hanger  

Installation Kit

64394-026

64394-009

VAULT

Vault Installation Kit/Non-Standard 

Permalog+

®  

Installation Kit

64394-027

64394-008

REMOTE

Remote Wall Mount Box Enclosure Kit

64394-028

64394-028

64394-021

Remote Installation Bracket Kit

64394-029

64394-029

64394-019

* Refer to ORI-P-09 for individual endpoint installation kit components. 

 5-11)

Page 7