Badger Meter Inc 2011W Manual De Usuario

For below the lid installations, a special mounting bracket (Figure 3) is available. This mounting support bracket is designed 

for use with 3/8”, 1/2” and 5/8” rebar or 1/2” schedule 40 PVC pipe.  

To install an ORION endpoint below a meter pit lid, follow these steps.

1.  Drive rebar or stake into the ground. 

 

Drive rebar or stake into the ground prior to attaching the endpoint to avoid damage.

2.   Once in the ground, secure the mounting bracket on the appropriate rebar or pipe using the enclosed washer, wing 

nut and hex head bolt provided with the bracket. 

3.  Insert the endpoint through the bottom of the bracket and thread the lock nut onto the top of the endpoint. For 

best results, mount the endpoint a maximum of 1 to 2 inches below the underside of the lid.

S

 5-11)

Page 9