Badger Meter Inc 2012WCE Manual De Usuario

4.  After the endpoint is mounted in the Remote Box Enclosure, loop the endpoint wire through the strain relief tab and 

through the cut out on the bottom of the enclosure. If needed, gel splice connections can be made and kept inside 

the Enclosure prior to mounting.  

5.  Verify that the Remote Box Enclosure is properly positioned with the endpoint antenna up and the endpoint IR port 

facing down. Secure the enclosure to the wall using appropriate customer-supplied screws. 

Right Side    

Strain Relief Tab

Cable out of 

Bottom

 5-11)

Page 13