Badger Meter Inc 2012WCE Manual De Usuario

2.  Place the endpoint into the ORION Remote Box Enclosure as shown in Figure 9. To ensure maximum endpoint  

performance, it is important to mount the ORION endpoint in the proper orientation, with the endpoint antenna up 

and ORION endpoint IR communication port and wire down.  

3.  Make certain the flat side of the endpoint is facing the back of the enclosure, or toward the installer, when  

inserting the ORION endpoint into the Remote Box Enclosure (Figure 9). When installing, mount the endpoint  

antenna toward the top of the enclosure, between the security ribs.  

 NOTE: The arrow on the back of the Remote Box Enclosure points up, toward the top of the assembly.   

 

 

When installing the Remote Box Enclosure to a wall, mount it with the arrow pointed up (toward the sky).

Top

Hole in Bottom

2 Strain Relief Tabs

3 Security Ribs

Endpoint Antenna

Security Ribs

Flat Side

Arrow

1/4

" Wide Slot

Page 12

                   5-11