Badger Meter Inc 2014W-OSE Manual De Usuario

After the ADE is assembled to the meter and the ORION endpoint is installed, the endpoint is ready for operation. Using 

a handheld or a mobile laptop confirms that the endpoint wiring has been done correctly and that the endpoint is 

broadcasting RF data for reading. When allowing the endpoint to turn on via consumption, the endpoint requires two hourly 

reading intervals where consumption has changed the electronic reading. For example, on a six-dial ADE, the ADE must 

detect consumption of 10 gallons over two, separate hourly reading periods before the endpoint will begin broadcasting 

read data. In either case, no specific testing or programming of the endpoint is required. Reading each pit endpoint after it 

has been installed verifies proper installation and reading performance.

ADE, ORION and RTR are registered trademarks of Badger Meter, Inc.
Other trademarks appearing in this document are the property of their respective entities.

© 2011 Badger Meter, Inc. All rights reserved. 

Due to continuous research, product improvements and 

enhancements, Badger Meter reserves the right to change 

product or system specifications without notice, except to the 

extent an outstanding contractual obligation exists.