Compal Electronics Inc PA3190U-1ETC Manual De Usuario

4

Thank you for purchasing our product.  The IEEE 802.11b WLAN Adapter is a CF

™

Interface Wireless LAN Module, which can connect your Pocket PC wirelessly to the existing

IEEE 802.11b wireless networks or form its own Wireless Network.    Using the adapter in

the Pocket PC, you can enjoy the complete mobile and high-speed wireless Internet

connectivity wherever you are.

Please read this manual carefully to get familiar with this product. This manual contains

detailed instructions in the operation of this product.    Please keep this manual for future

reference.

1.  Remove the screws to open the PDA back cover

2.  Carefully place the module into the module compartment

3.    Put the cover back and fasten the screws

Step 0: The process below is for install Platform Builder common-line.    Please don’t via IDE

interface to process the following step1 through step 3.

Step 1: Please copy the following files to an appropriate folder: EC2NDS.dll, EC2NDS.pdb,

EC2NDS.map

Example: 1. Please copy the file to the designated workspace for building in EC2NDS where

NE2000 exists.

        2. Or please copy the file to any folder.

Step 2: Please open the file “ PROJECT.BIB” of the built-in EC2NDS via WordPad,

and follow the process of writing other components . Copy the path of EC2NDS.dll in Step 1

to “PROJECT.BIB” and press “save”.

Example: If the file ” EC2NDS.dll” is placed in

“ c:\wince300\public\common\oak\target\x86\ce\release\..”, you have to put

“EC2NDS.dll” in the following path:

c:\wince300\public\common\oak\target\x86\ce\release\ EC2NDS.dll”into and then save the

file “PROJECT.BIB”.

Step 3: Via WordPad, open the file “ COMMON.REG” which you would like to built-in”EC2NDS”.

Please copy the following two Registries to NE2000, Proxim, Xircom2 opposite position

respectively (Note: There are two registries exist in “COMMON.REG”, “NE2000, Proxim,