Compal Electronics Inc TG9D Manual De Usuario

Descargar
Página de 92
Getting Started 
 
 
                           
26
 Installation & Removing 
  Installing the battery 
1. Press the lock on the bottom and then slide the battery cover 
backward and lift up battery cover.     
2. Hold the battery and wedge it under two up corners.    Press 
the battery pack into place. Make sure that golden connectors 
are facing the connector on the phone.    As shown below 
figures (1) and (2).   
3. Place the cover into the track and slide it forward and lock 
with cover latch. As shown below figures (3) and (4). 
 
 
 
  Removing the battery 
1. Turn phone off and repeat the above item 1 to open the 
battery cover. Figure (1) and (2) 
2. Lift up the bottom of the battery pack and pull battery by 
sliding backward to detach the battery from phone. Figure (3) 
and (4).   
3. Repeat above item 3 to recover the battery cover.