Compal Electronics Inc TG9D Manuale Utente
Getting Started
26
Installation & Removing
Installing the battery
1. Press the lock on the bottom and then slide the battery cover
backward and lift up battery cover.
2. Hold the battery and wedge it under two up corners. Press
the battery pack into place. Make sure that golden connectors
are facing the connector on the phone. As shown below
figures (1) and (2).
3. Place the cover into the track and slide it forward and lock
with cover latch. As shown below figures (3) and (4).
backward and lift up battery cover.
2. Hold the battery and wedge it under two up corners. Press
the battery pack into place. Make sure that golden connectors
are facing the connector on the phone. As shown below
figures (1) and (2).
3. Place the cover into the track and slide it forward and lock
with cover latch. As shown below figures (3) and (4).
Removing the battery
1. Turn phone off and repeat the above item 1 to open the
battery cover. Figure (1) and (2)
2. Lift up the bottom of the battery pack and pull battery by
sliding backward to detach the battery from phone. Figure (3)
and (4).
and (4).
3. Repeat above item 3 to recover the battery cover.