Compal Electronics Inc TG9D Manual De Usuario

Basic Operation 

 

                           

34

1. Power off the phone and install your SIM card. 
2. If the battery is out of power, you can still connect to your 
travel charger and use the phone normally. 

3. Press 

  to turn on. If the display indicates “Enter PIN”, 

key in the PIN number of your SIM card, (please refer to the 
Manual provided by the telecommunication company for details) 
and press 

.  

4. Key in the area code and telephone number, and press 

 

to dial the number. 
 

Your telecommunication company provides the SIM card. 
Please use a small SIM card to fit the design of this phone. For 
the SIM installation, please refer to 

page 27

.  This phone can 

be used only with legally issued SIM cards and can receive or 
send the calls only within the SIM network service range. 

The Li-ion battery that comes with this phone is rechargeable. 
Please use the charger and the battery provided by the original 
manufacturer to ensure a long lifetime for the cellular phone. 
1. Plug the charger into an appropriate outlet that meets the 

requirements of this phone. The other end is connected to 
the phone. While the phone is recharging, the screen will 
automatically display the current power recharge status of 
the battery via a flashing signal. The phone can still function 
normally if it is turned on while being recharged. Once the 
recharging process is finished, the flashing signal will stop. 

2. Once the recharging process is completed, the charger can 

be disconnected from the phone and electrical outlet.