Compal Electronics Inc TG9D ユーザーズマニュアル
Basic Operation
34
Basic Operation
Making a Call
1. Power off the phone and install your SIM card.
2. If the battery is out of power, you can still connect to your
travel charger and use the phone normally.
2. If the battery is out of power, you can still connect to your
travel charger and use the phone normally.
3. Press
to turn on. If the display indicates “Enter PIN”,
key in the PIN number of your SIM card, (please refer to the
Manual provided by the telecommunication company for details)
and press
Manual provided by the telecommunication company for details)
and press
.
4. Key in the area code and telephone number, and press
to dial the number.
The SIM Card
Your telecommunication company provides the SIM card.
Please use a small SIM card to fit the design of this phone. For
the SIM installation, please refer to
Please use a small SIM card to fit the design of this phone. For
the SIM installation, please refer to
page 27
. This phone can
be used only with legally issued SIM cards and can receive or
send the calls only within the SIM network service range.
send the calls only within the SIM network service range.
Battery and Charger
The Li-ion battery that comes with this phone is rechargeable.
Please use the charger and the battery provided by the original
manufacturer to ensure a long lifetime for the cellular phone.
1. Plug the charger into an appropriate outlet that meets the
Please use the charger and the battery provided by the original
manufacturer to ensure a long lifetime for the cellular phone.
1. Plug the charger into an appropriate outlet that meets the
requirements of this phone. The other end is connected to
the phone. While the phone is recharging, the screen will
automatically display the current power recharge status of
the battery via a flashing signal. The phone can still function
normally if it is turned on while being recharged. Once the
recharging process is finished, the flashing signal will stop.
the phone. While the phone is recharging, the screen will
automatically display the current power recharge status of
the battery via a flashing signal. The phone can still function
normally if it is turned on while being recharged. Once the
recharging process is finished, the flashing signal will stop.
2. Once the recharging process is completed, the charger can
be disconnected from the phone and electrical outlet.