Shenzhen Yitoa Intelligent Control Co. Ltd. 300082 Manual De Usuario

Quick Reference guide

Prior to the first use of the

fireplace verify the following:

Are the circuit breakers for

•

the socket the unit uses

on?
Are the light bulbs in your

•

fireplace loose? (to check,

follow the instructions for

replacing the light bulbs

under the maintenance

section of this manual)

The heater on your fireplace

may emit a slight, harmless

odor when first used. This

odor is a normal condition

caused by the initial heating

of internal heater parts and

will not occur again.
The information regarding the

model of your fireplace can

be found on the rating plate.

Site Selection and Preparation

WARNINg: Ensure the power

cord is not installed so that it is

pinched or against any sharp

edges and ensure that the power

cord is stored or secured to avoid

tripping or snagging to reduce the

risk of fire, electric shock or injury

to persons.
Electrical outlet wiring must

comply with local building codes

and other applicable regulations

to reduce the risk of fire, electric

shock and injury to persons.
Do not attempt to wire your

own new outlets or circuits. To

reduce the risk of fire, electric

shock or injury to persons, always

use a licensed electrician.

This section provides instructions

for selecting a location and

preparing the site to install the

fireplace into your Dimplex mantel

surround.

select a suitable location that

is not susceptible to moisture

and is away from drapes,

furniture and high traffic.
For ease of electrical hook

up you may wish to locate

the fireplace near an existing

outlet (refer to noTE 1).
store the fireplace in a safe

dry and dust free location.

CAUTION: Clearance for

air circulation beneath the

fireplace is provided by two