GatesAir Inc. UAXFLID Manual De Usuario
10/6/10
888-2721-001
2-11
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Maxiva UAX Transmitter Indoor System
User Manual
2.9
Customer Remote Control & Interlock Connections
Figure 2-9 Customer Remote Control & Interlock Connections
The circuit board mounted on the left side of the Customer I/O panel (Figure 2-9), is
used for remote control connection to the transmitter. J4 is an Interlock connector that
can be used to add peripheral devices such as an antenna switch into the transmitter
interlock system. Refer to the UAX transmitter manual for connection details.
used for remote control connection to the transmitter. J4 is an Interlock connector that
can be used to add peripheral devices such as an antenna switch into the transmitter
interlock system. Refer to the UAX transmitter manual for connection details.