Digital Monitoring Products Inc PC0124 Manual De Usuario

LT

-1073

1.01

©

2009

Digital

Monitoring

P

roducts,

Inc.

800-641-4282

www.dmp.com

Made in the USA

INTRUSION • FIRE • ACCESS • NETWORKS

2500 North Partnership Boulevard

Springfield, Missouri 65803-8877

9425

Typical battery life expectancy for DMP Model 1105 wireless transmitters is 5 years.  DMP wireless equipment uses 

two-way communication to extend battery life.  
The following situations can reduce battery life expectancy:

•  If a receiver is unplugged or not installed.  

Note: Transmitters continue to send supervision messages until a receiver returns an acknowledgement.   

After an hour the transmitter only attempts a supervision message every 60 minutes.

•  Frequent transmissions, such as a door contact where messages are sent every time the door opens or closes.
•  When installed in extreme hot or cold environments.

The following situation can extend battery life expectancy:

•  Extend transmitter supervision time in panel programming.
•  Infrequent transmission trips, such as a window that rarely sends messages.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  

(1) This device may not cause harmful interference, and  

(2) this device must accept any interference received, including interference that may cause undesired operation.
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all

persons. It must not be co-located or operated in conjunction with any other antenna or transmitter.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.
NOTE:  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.  This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation.  If this equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:
-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and receiver.
-  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-  Consult the dealer or an experienced radio/TV technician for help.

Battery 

Life Expectancy 

5 years (normal operation) 

Type

3.0V lithium CR123A 

See Battery Life Expectancy for full details.

Frequency Range:  903-927 MHz

Dimensions 

Transmitter Case   

 

1.75” L x 1.6” W x 0.79” H 

Standard Magnet Housing 

    

1.35” L x 0.375” W x 0.425” H 

Commercial Magnet Housing 

 

2.25” L x 0.375” W x 0.34” H

Color

White

Housing Material  Flame retardant ABS

U. S. Patent No. 7,239,236

FCC Part 15 Registration ID CCKPC0124
IC Registration ID 5251A-PC0124
Underwriters Laboratories (UL) Listed
 ANSI/UL 1023

Household Burglar Alarm System Units 

ANSI/UL 634

Connections and Switches for use with  

 

   

Burglar Alarm Systems Accessory 

ANSI/UL 985

Household Fire Warning System

 

   

Accessory

  Additional UL Listings for 1105-EOL only
 ANSI/UL 365

Police Station Connected Burglar 

ANSI/UL 609

Local Burglar Alarm Units and Systems 

ANSI/UL 1076

Proprietary Burglar Alarm Units 

ANSI/UL 1610

Central Station Burglar Alarm Units 

ANSI/UL 864

Fire Protective Signaling Systems