Digital Monitoring Products Inc PC0156 Manual De Usuario
Digital Monitoring Products
EM20 PERS Installation Guide
4
InstallatIon
Telephone Connections
10.1 Telephone
Connect the House Phone
1. Unpack the color-coded phone wire and fully unroll.
1. Unpack the color-coded phone wire and fully unroll.
2. Connect the Green wire to the Green RJ11 Connector on the back of EM20.
3. Connect the opposite end of the Green wire to the house phone wall connection.
10.2 Cellular
Connect to Cellular Network
1. When AC power is applied, the EM20C will begin searching for cellular signal.
1. When AC power is applied, the EM20C will begin searching for cellular signal.
10.3 FCC Registration
The panel complies with FCC part 68 and is registered with the FCC.
Registration number: CCKAL01BXEM20
Ringer Equivalence: 0.1 B
Registration number: CCKAL01BXEM20
Ringer Equivalence: 0.1 B
10.4 Notification
Registered terminal equipment must not be repaired by the user. In case of trouble, the device must be
immediately unplugged from the telephone jack. The factory warranty provides for repairs. Registered
terminal equipment may not be used on party lines or in connection with coin telephones. No tification must
be given to the telephone company with the following information:
a. The particular line(s) the service is connected to
b. The FCC registration number
c. The ringer equivalence
d. The make, model, and serial number of the device
b. The FCC registration number
c. The ringer equivalence
d. The make, model, and serial number of the device
10.5 CS-03 Registration Information
This product meets the applicable Industry Canada technical specifications.
Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.
The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be
Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.
The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination of an interface may consist of any combination of
devices subject only to the requirement that the sum of the RENs of all the devices not exceed five.
L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être
L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être
raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison
quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous
les dispositifs n’excède pas cinq.
TELEPHONE
Wall Jack
ELECTRICAL
Wall Jack
EM20D
Console
Home Phone
16.5Vac
Power
Adapter
16 VDC
Figure 6: Telephone Connections.
ELECTRICAL
Wall Jack
EM20C
Console
16.5V AC
Power
Adapter
16 VDC
Figure 7: Cellular Connections.