Digital Monitoring Products Inc PC0179 Manual De Usuario

13

This section allows you to enter the information needed to send and receive messages 

directly to and from the panel via Email using network communication. The Destination

addresses allow up to 48 characters to be entered. System Name is displayed with initial

caps.

The transmitted messages are:

• Zone Alarms by Zone Name
• Zone Troubles by Zone Name
• Zone Bypass by User
• Arming (Closings) by User
• Disarming (Openings) by User
• AC Power Trouble and Restoral
• System Low Battery
• Cancel by User

Select YES to allow the panel to send messages to three programmed destinations.

Default is NO.

Enter a unique name for the communicator. The communicator name is used as the 

sender of the message. The text entered is displayed with initial caps. If this field is left

blank, the communicator account number is sent.

Enter the first Email address where messages will be sent. The message can be sent to

any device (computer, cell phone, tablet) as long as a valid Email address is entered.

When entering Email addresses, press the 7 digit key followed by the fourth Select Key

to add the @ symbol and the 9 digit key followed by the fourth Select Key to add the _

symbol. See the Entering Non-Alpha Characters section for additional symbols.

Enter a user’s user number from this account. This option is used when sending commands

such as arming or disarming to the iComSL using Email. The user number must have the

authority to perform the commands. Entering 0 (zero) disables this option. Default is 0.

Enter the second destination Email address.

Enter the user’s User Number for arming/disarming authorization.

Enter the third destination Email address.

Enter the user’s User Number for arming/disarming authorization.

Select

YES to allow the panel to send Opening and Closing reports via Email.

Default is NO.

This number limits the monthly incoming and outgoing Email messages allowed to be

sent or received by the panel.

A panel event that causes messages to be sent to destination Email addresses is counted

towards the panel’s monthly limit. For example, if an alarm message is sent to an Email

address, a total of 2 messages are counted towards the monthly limit for the panel. The

limit is reset at midnight on the 14th of every month. Range is from 0 to 999. When 0 is

entered, there is no limit on the number of messages able to be sent or received by the 

panel. Default is 0.

The remaining options allow the Email server to be selected by the installing dealer.

Typically this will be the Email service provided by the installing dealer. This allows

opportunity for additional services to be provided to the end user.

MESSAGING SETUP 

DESTINATION 1

-

DESTINATION 2

-

 

DESTINATION 2 

USER NUMBER: 

0

DESTINATION 3 

-

SYSTEM NAME

-

ENABLE MESSAGING

YES

 

DESTINATION 1 

USER NUMBER: 0

O/C  EMAIL  NO YES

 

DESTINATION 3 

USER NUMBER: 

0

MONTHLY  LIMIT:  

0