Honeywell International Inc. 8DLLYNXREN-5 Manual De Usuario
–20–
Data Field Descriptions
✻
47
Phone System Select
Central
Dialing Mode
Station Pulse Tone Pulse Tone
No
WATS
No
WATS
0 = No
Speaker
Phone
Call Wait
Cancel
Disabled
Speaker
Phone
Call Wait
Cancel
Disabled
1 = No
Speaker
Phone
Call Wait
Cancel
Disabled
Speaker
Phone
Call Wait
Cancel
Disabled
4 = With
Speaker
Phone
Call Wait
Cancel
Disabled
5 = With
Speaker
Phone
Call Wait
Cancel
Disabled
Speaker
Phone
Call Wait
Cancel
Disabled
WATS
2 = No
Speaker
Phone
Speaker
Phone
Call Wait
Cancel
Disabled
Cancel
Disabled
3 = No
Speaker
Phone
Speaker
Phone
Call Wait
Cancel
Disabled
Cancel
Disabled
6 = With
Speaker
Phone
Call Wait
Cancel
Disabled
7 = With
Speaker
Phone
Speaker
Phone
Call Wait
Cancel
Disabled
Cancel
Disabled
No
WATS
WATS
8 = No
Speaker
Phone
Call Wait
Cancel
Enabled
Speaker
Phone
Call Wait
Cancel
Enabled
9 = No
Speaker
Phone
Call Wait
Cancel
Enabled
Speaker
Phone
Call Wait
Cancel
Enabled
12 = with
Speaker
Phone
Call Wait
Cancel
Enabled
13 =
With
Speaker
Phone
Call Wait
Cancel
Enabled
With
Speaker
Phone
Call Wait
Cancel
Enabled
WATS
10 = No
Speaker
Phone
Call Wait
Cancel
Enabled
Speaker
Phone
Call Wait
Cancel
Enabled
11 = No
Speaker
Phone
Call Wait
Cancel
Enabled
Speaker
Phone
Call Wait
Cancel
Enabled
14 = With
Speaker
Phone
Call Wait
Cancel
Enabled
15 = With
Speaker
Phone
Call Wait
Cancel
Enabled
Speaker
Phone
Call Wait
Cancel
Enabled
This option is used to enter the correct type of phone dialing (pulse or tone),
and to select the correct WATS line option for the Central Station. It is also
to activate the Speaker Phone option and to disable call waiting.
Call waiting warning tones can interfere with Central stations reporting.
The Call Waiting Cancel option should be selected if the reporting phone
line has call waiting service. The Call Waiting Cancel command must also
be programmed in Field *40. If the Call Waiting Cancel feature is enabled,
make sure to enter Call Waiting Cancel command in Field *40. The
command depends on a telephone service provider.
Important Note: If Call Wait Cancel is disabled in Field
and to select the correct WATS line option for the Central Station. It is also
to activate the Speaker Phone option and to disable call waiting.
Call waiting warning tones can interfere with Central stations reporting.
The Call Waiting Cancel option should be selected if the reporting phone
line has call waiting service. The Call Waiting Cancel command must also
be programmed in Field *40. If the Call Waiting Cancel feature is enabled,
make sure to enter Call Waiting Cancel command in Field *40. The
command depends on a telephone service provider.
Important Note: If Call Wait Cancel is disabled in Field
✻47, and Call
Waiting Disable command is entered in Field
✻40, this
will prevent successful communication to the central
station when used on a non-call waiting line.
station when used on a non-call waiting line.
Notes: (1) PABX number and operation of the control panel with a PBX
system cannot be used if the Call Waiting Cancel option has
been enabled in Field
been enabled in Field
✻47.
(2)
If using pulse dialing, you must enter the numbers slowly in
order to allow the pulse dialer time to operate.
order to allow the pulse dialer time to operate.
✻
48
Report Format for Primary/Secondary
Primary Secondary
See choices below
See choices below
0 = 3+1; 4+1 ADEMCO Low Speed Standard
1 = 3+1; 4+1 Radionics Standard
2 = 4+2 ADEMCO Low Speed Standard
3 = 4+2 Radionics Standard
5 = ADEMCO Contact ID® Reporting with 10-digit
subscriber account number
6 = 4+2 ADEMCO Express
7 = ADEMCO Contact ID® Reporting with 4-digit
subscriber account number
8 = 3+1; 4+1 ADEMCO Low Speed Expanded
9 = 3+1; 4+1 Radionics Expanded
Enter
✻
as the 4th digit of
✻
43 through
✻
44, if 3+1 dialer reporting is to be
used. (For an explanation of these formats, see the System Communication
section of this manual.)
Notes: (1) The maximum number of alarms is determined by field
section of this manual.)
Notes: (1) The maximum number of alarms is determined by field
✻
92.
(2) If Option 5 is selected a 10-digit account number must be
entered in Fields
✻
43 or
✻
44.
(3) Option 5 or 7 (ADEMCO Contact ID® Reporting) must be
selected for AVM.