Williams Sound T46 Manual De Usuario
PPA T46 Manual
Page 7
Preliminary
To unlock the menu, simply press and hold the left and right buttons for 3 seconds again. The display will briefly show a
message indicating that the menu has been unlocked, and then return to the Main Screen. The “Menu Locked Indicator”
on the Main Screen will be off.
The PPA T46 Transmitter remembers the Menu Lock setting, and on power up will default to its most recent setup.
message indicating that the menu has been unlocked, and then return to the Main Screen. The “Menu Locked Indicator”
on the Main Screen will be off.
The PPA T46 Transmitter remembers the Menu Lock setting, and on power up will default to its most recent setup.
Restoring Factory Defaults
Press the “Menu” button to step through the Basic Features to the “Enter Advanced Setup” screen. Press the right button
to select “Yes”. Press the “Menu” button to step through the Advanced Features. At the end of the Advanced Features
menu is a screen that provides the option of rebooting the T46 with factory default settings. Press the right button to
restore factory defaults:
to select “Yes”. Press the “Menu” button to step through the Advanced Features. At the end of the Advanced Features
menu is a screen that provides the option of rebooting the T46 with factory default settings. Press the right button to
restore factory defaults:
•
Frequency = 72.1MHz
•
Master Volume Level = 15
•
Auxiliary Volume Level = 15
•
Compression = 1:1
•
Frequency Display Mode = Frequency
•
Channel Selection Mode = 17 Channel
•
Screen Time-Out Period = 20 seconds
•
Screen Brightness Adjustment = High
•
Menu Lock = Off
•
Mute = Off
Using the PPA T46 in Dual Preset Mode
The PPA T46 transmitter has the ability to be set up in 2 modes at once, so that a user can toggle back and forth between
them. Each mode has “Dual Presets” for each of the 3 basic features: frequency, master volume, and auxiliary volume.
This means that with the touch of a button, you could:
them. Each mode has “Dual Presets” for each of the 3 basic features: frequency, master volume, and auxiliary volume.
This means that with the touch of a button, you could:
•
Mute your auxiliary input source, or drop its audio to a low background level you can comfortably speak over.
•
Switch your Master Volume level as you hand the transmitter off to a coworker with a softer voice.
•
Switch between two transmission frequencies.
Or any combination of these features.
Turning Dual Preset Mode On or Off:
1.
Power the unit down by holding the “On/Off/Mute” button for 3 seconds.
2.
Press and hold the “Menu” button on the front face of the unit.
3.
While holding the “Menu” button, press and hold the “On/Off/Mute” button for 3 seconds to turn the unit back
on.
on.
If the unit was in Normal Mode, this will bring it up in Dual Preset Mode. If the unit was in Dual Preset Mode, this will
bring it up in Normal Mode. As with all settings, the PPA T46 will remember this setting, and revert to it at power on.
bring it up in Normal Mode. As with all settings, the PPA T46 will remember this setting, and revert to it at power on.