BI TAD001 Manual De Usuario
BI TAD
FCC Specifications & Product Installation
Proprietary & Confidential
5
5.
Slide the male hinge into the sizing hole numbered three more than the number you
noted in step 3. For example, if you noted the strap sizing number 6 in step 3, you will
slide the male hinge into the strap hole numbered 9.
noted in step 3. For example, if you noted the strap sizing number 6 in step 3, you will
slide the male hinge into the strap hole numbered 9.
Attaching
When attaching the TAD unit to the client, keep the following requirements in mind:
The strap sizing numbers must face outward (away from the leg).
The TAD unit must be in the upright position (battery toward the bottom of the
ankle).
ankle).
To attach the TAD unit
1.
Wrap the TAD unit around the client’s ankle as you did in step 1 of the previous section.
2.
Align the male hinge with the fiber‐optic connector on the fixed strap. Press firmly on the
fixed strap to hold both straps in place.
fixed strap to hold both straps in place.
3.
Close the hinge assembly around the straps until the locking holes are aligned.
4.
Slide a locking pin into both sides of the hinge assembly. The wing‐tipped ends of the
locking pins must be inserted first. The locking pins should be flush with the sides of the
hinge assembly.
locking pins must be inserted first. The locking pins should be flush with the sides of the
hinge assembly.