Lectrosonics Inc HHAB1 Manual De Usuario

HHa

LECTROSONICS, INC.

A mic capsule is

threaded onto the body

of the transmitter in the

direction shown.

Do not overtighten it.

The lower housing opens by rotating

it in the direction shown. After the

threads are disengaged, pull the

housing downward until it engages

the detent that holds it open.

The threaded interface is a 1.25”

diameter opening with 28 threads

per inch and three contact rings

Mechanical Assembly

Microphone Capsules:

Lectrosonics offers two types of capsules. The HHC is
the standard capsule and the HHVMC is the Variable
Mic Capsule which includes adjustments for Bass,
Midrange and Treble.

HHC Lectrosonics
cardioid electret

HHVMC Lectrosonics cardioid
electret with VariMic preamp

Along with these two models from Lectrosonics, a
variety of different capsules with a common thread
and electrical interface are available from the major
microphone manufacturers.

A list of compatible capsules is on the website at www.
lectrosonics.com listed on the HH transmitter page.

Do not touch the contacts between the mic capsule

and transmitter body. When necessary, the contacts

can be cleaned with a cotton swab and alcohol.

*All product names are trademarks of their respective
owners, which are in no way affiliated with Lectrosonics.

Capsule Installation

Capsules are attached with a right-hand thread.

To remove the windscreen from the mic capsule,
line up the blue wrench (included with the capsule
head) with the flat notches on the lower threaded area
of the mic capsule.

Align flats on the wrench with flats on the capsule.